Air Blade Air Knife, X-Stream Air Blade Air Knife, Curved Air Blade From Nex Flow

Nex Flow™ Air Blades™ dramatically reduce compressed air and noise levels as compared to other blow-off products. Nex Flow™ Air Blades™ provide a compact and efficient means to dry, clean and cool materials. An Air Knife operates by entraining the surrounding air along with the compressed air utilizing the “coanda” effect essentially converting energy which would normally be lost as noise and pressure drop into useful flow. No matter what anyone tells you, all Air Knives using the coanda effect are essentially the same in performance with negligible differences. However, how they are made is what is very important to make sure you get value for your money.

Air Consumption approx. 3.4 SCFM (82 SLPM) per inch (25.4 mm) at 80 psig (5.5 bar) with force and noise levels comparable to standard Air Knives or Air Knife of all types (approx. 2.7 oz (77 grams) and 83 dBA at 80 psig or 5.5. bar and 6” (152 mm) from the target.

Air Consumption approx. 2.9 SCFM per inch at 80 psig with force and noise levels comparable to standard Air Knives or Air Knife of all types (approx. 2.7 oz (77 grams) and 83 dBA at 80 psig or 5.5. bar and 6” (152 mm) from the target. The X-Steam™ Air Blade Air Knife is normally the best choice due to very low noise levels and it uses less air than a standard Air Blade ™ Air Knife at the same pressure. However the standard unit is lower in cost and has a slightly higher force at the same pressure. Either version may be mounted end to end for longer lengths of continuous flow.

Air Consumption approx. 3.4 SCFM (82 SLPM) per inch (25.4 mm) at 80 psig (5.5 bar) with force and noise levels comparable to standard Air Blade ™ Air Knife of all types (approx. 2.7 oz (77 grams) and 83 dBA at 80 psig or 5.5. bar and 6” (152 mm) from the target.

All our Air Knives are full flow which means they can be put end to end for continuous flow and takes up less space in tight areas. Even one competitor’s so-called full-flow standard answer to our Nex Flow™ standard Air Blade ™ Air Knife is not nearly as efficient as ours by their own published values and is only a small, flimsy version in comparison.

Our Air Knife and Air Knives come with a stainless steel shim to maintain the gap for the compressed air to exit. Many companies use plastic shims which may be “squeezed” for uneven flow but more important, no matter how clean you make the compressed air line, the plastic will wear. Plastic shims are one of the biggest complaints customers have with air knives – Nex Flow™ however use stainless steel shims as a standard in all air knife and Air Knives

Easy mounting. Some air knife designs are difficult to mount and require dismantling, often effecting flow and making the job of mounting more difficult. All Nex Flow™ Air Knives have convenient mounting holes.

All Nex Flow™ aluminum Air Knives are anodized while many competitors do virtually nothing to the aluminum for protection. In fact, if you want any better protection they try to get you to buy more costly stainless steel when simple anodizing is less costy and already “standard” with Nex Flow™.

Flexibility in connections. Except for the very short lengths, both standard and X-Stream™ versions have compressed air ports at the ends and the back for flexible choice in air input.

Air Blade™ Air Knife, X-Stream™ Air Blade™ Air Knife, Curved Air Blade™ Air Knife From Nex Flow™